PFE Advanced 20 Outputs

PFE Advanced 20 Outputs

• Absolutely waterproof (Standard IP65, if breather is replaced with a sealed screw IP67)
• Framed flat gaskets with large sealing surface
• Extremely robust and thick-walled aluminium housing
• All outputs can be programmed without any restrictions
• Fully integrated wireless solution
• Brilliant display with menu in plaintext
• Bi-directional communication and programming
• Measures and displays the precise resistance of all outputs
• Maximum firing rate: up to 100 firings per second possible
• Integrated, high-brightness firing LEDs on each output for fast testing
• Optional Sleep Mode available with up to 6 weeks stand-by time
• Direct control of magnetic valves (12V)
• Programmable firing duration
• Numerous special functions for applications in the SFX area

Most important differences to the
PFE Advanced 10/100 Outputs

• Smaller, the dimensions are: 230 x 101 x 68 mm without handle, length 257 mm with handle
• Less weight: 2,300 g instead of 4,500 g
• No Matrix Module available or respectively possible
• 20 Outputs with 20 multicolor LEDs
• Rechargeable battery: 1x12V 2,000 mAh SLA Pb instead of 2x12V 2,000 mA SLA Pb (24V)
• Terminal function with 10 outputs, 12V instead of 24V
• Fires 20 sensitve and 10 insensitive igniters in parallel (the same with PFE Adv. 10/100)
• Fires 7 igniters in series (PFE Adv. 10/100: 14)
• Stepping function: available optionally (exactly like 10/100 output device)
• Keyboard firing available by default with no extra charge, 10 outputs only
• Operation time: 40 h continuous receive (PFE Adv. 10/100: 60 h)
• Sleep function: available optionally, after 45 days 50% of the energy in battery is left (PFE Adv. 10/100: 35 days)
• No cable interface because our customers do not use this.

The PFE Advanced 20 Outputs can be remotely queried and programmed using PFC Advanced Standard and Black Edition as well as PFM Advanced and Composer. This has already been implemented in the respective software. However, you must update PFC Advanced and Composer to access the device (PFC V2.88 or later).