Matrix 50/100 Outputs
- 100% waterproof (IP67) extension module for the PFE Advanced 10 Outputs
- Molded in robust and resistant silicone
- Available with 50 or 100 Outputs
- Gold plated terminals for quick-fastening clamps offer best conductivity
- Integrated, high-brightness firing LEDs on each output for fast testing
- Precise resistance measurement for each individual output
- Easy-to-read output numbers
- Individual programming of all outputs
- Fast and dynamic step sequences with all outputs possible
Included
1 Matrix 50/100 Outputs
Specifications
Outputs | 50 or 100 |
Assignment of firing cues without restrictions | Yes, 1-999 |
Firing voltage | 24 V |
Firing current | 50 A, 17 A continuous current |
Firing LEDs for each output | Yes |
Source of firing energy | Rechargeable battery |
e-matches in series connection / output | 14 A, 14 U |
e-matches in parallel connection / output | 20 A, 10 U |
e-matches in special serial and parallel connection / output | 280 A, 140 U |
Possibility to activate magnetic valves (i.e. solenoids) | Yes |
Usage of the stepping extension of the receiver | Yes, optional, 0.01 – 99.99 seconds, resolution 1/100 s (i.e. 0.01 s) |
Simultaneous stepping sequences per device | 50 or 100 |
Max. firing rate | 100 firings / second |
OK test function (continuity test of firing lines) | Yes, precise resistance metering, ranging from 0 to 99 Ohms, directly at the receiver or remotely by using the PFC Advanced or any PC with PFM Advanced and Composer software |
Housing | Circuit board casted in silicone rubber |
Level of water ingress protection | Waterproof, IP67 |
Dimensions | Matrix Module 100 Outputs 340 x 225 x 50 mm Matrix Module 50 Outputs 340 x 115 x 50 mm |
Net Weight | Matrix Module 100 Outputs 2,600 g Matrix Module 50 Outputs 1,600 g |
FAQ’s
N/A
Add-Ons
- Quick-fastening clamps
- Zarges case